Custom Guitar Wiring Kits


Custom Wiring Kits

If you can’t find the wiring kit you need for your guitar we do make custom kits as well at reasonable prices, we will just need some information from you first and we will send you a quote. What we need are some photographs of your guitar so we can be sure to build your kit to fit.


First we will need a photo of your guitars control cavity with the original electronics in it. This will give us an idea of the amount of space in the cavity to accomodate the larger pots, caps and any specialty switches requested. If we are questioning if the parts will fit or not we will request measurements of the cavity but this is usually not required. Here is an example of the control cavity of a 1980’s SG that we did for a customer in Australia. The larger the pictures the better it is for us to see any details we may need to know in the layout or wiring.

Next we will need pictures of the front of the guitar without the knobs and a ruler next to the pot holes or pot shafts showing the distance between the pot holes, switch and jack. This will ensure a correct fit for your guitar. Here are a couple of examples from some customers.












This next example came from a customer that wanted to change his setup on his Dearmond Starfire. He wanted to switch his setup to a master volume and master tone and then move the switch toward the rear in one of his tone holes.


We will also need to know if you want this made as a Vintage series, Firestorm series or Standard series. The differences between these series is mainly the type of wiring (modern or vintage), type of wire (Shielded or cloth covered), capacitors (Vitamin T oil filled or MOJO Dijon) and whether it has a volume mod or not. Please check our different lines of kits and our components tell us which line you would like your kit built to.

We will need to know any special requests such as push pull pots for coil tapping or wiring your switch as a kill switch.

If you have a wiring diagram you wish us to follow then send that as well. Please email the desired kit type, photos and any diagrams or measurements to customerservice@bcsguitars.com and we will send you a quote.

Categories : Blog

Leave a Comment

Turn Around Time

Due to the expansion of our customer base, our turnaround times are 3 to 5 weeks from the time you order. We have recently picked up two guitar manufacturers that we are building wiring harnesses for, and the word of mouth about the quality of our work and customer service has expanded our customer base tremendously. Each kit is built to order, and in the order it was received. It will take some time for you to receive your kit, but it will be well worth the wait, guaranteed! - Bill Brown/owner BCS Guitars.

Warning: Unknown: open(/home/content/32/4220432/tmp/sess_eoa5mf8to6d74dgm7p4f6a9tf5, O_RDWR) failed: No such file or directory (2) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0